FARGO electronic HDP5000 Process Flow in table format, Reviewing the HDP5000 Boot-up Sequence

RESTRICTED USE ONLY Fargo Electronics, Inc.

HDP5000 Process Flow (in table format)

Reviewing the HDP5000 Boot-up Sequence

Step	Process
1	The Card feed stepper turns ON (to check for a card in the card path).
2	The Lam Headlift turns until the head up position is returned from the Headlift
	Sensor).
3	The Film transfer take-up Motor turns ON to take up any slack in the film.
4	The Print Headlift turns until head up position is returned from Headlift
	Sensor.
5	The Print Ribbon moves forward until it finds the yellow panel, pauses,
	advances to magenta, then backs up to yellow (the Ribbon Sensor detects
	the color of the ribbon).
6	The Transfer Film advances forward two panels from supply (advances until
	the Print Film Sensor senses 2 marks on the Film).
7	The Transfer Film advances forward one panel from supply (advances until
	the Print Film Sensor senses 1 mark on the Film).
8	The Transfer Film reverses for one panel onto supply (reverses until the Print
	Film Sensor senses 1 mark on the Film).
9	The Transfer Film reverses for one panel onto supply (reverses until the Print
	Film Sensor senses 1 mark on the Film).

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 1-3