FARGO electronic HDP5000 Film Rfid tag is bad, Cancel Print button or, Cancel button located on

RESTRICTED USE ONLY Fargo Electronics, Inc.

Troubleshooting with the LCD Error Message Table (continued)

LCD Error Message	Cause	Solution
No E-card Encoder	You are trying to send	You are trying to send
(PC Error Message	encoding data, but the	encoding data, but the Printer
	Printer is not configured with	is not configured with this
No. 202)
	this Encoder type.	Encoder type.
No Film	Film is not installed in the	Install the Film and press
(PC Error Message	Printer.	Resume.
	OR
No. 28)		To cancel the print, press the
	Film RFID tag is bad.
		Cancel Print button or the
		Cancel button located on the
		Printer.
No Flip Module	Two-sided job sent to a one-	Verify the Printer has flipper
(PC Error Message	sided Printer.	capabilities via the LCD Menu.
No. 201)		If Flipper capabilities are
		present, ensure that the Print
		Both Sides option in the
		Driver is set correctly.
		Press the Resume button on
		the Printer’s Front Cover to
		continue printing.
		To cancel the print, press the
		Cancel Print button from the
		Driver’s display dialog.
No Flip Module	The desired lamination	Change the Cartridge location
(PC Error Message	requires a Flipper Module.	of the Lamination material (if it
		is dual sided), or buy a Flipper
No. 45 and 201)
		Module.

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-16