FARGO electronic HDP5000 manual Reviewing Frequently-asked Questions Answer

RESTRICTED USE ONLYFargo Electronics, Inc.

Reviewing Frequently-asked Questions (continued)

Question		Answer
How do I upgrade the	This is done in the same manner as a USB-connected
Printer Firmware in my	Printer. The PC doing the upgrade must have a Driver
Ethernet-enabled Printer?	installed for the Fargo Printer to be upgraded.
	Follow this procedure.
	1.	Run the Fargo Workbench Printer Utility from the start
		menu: Go to the Start -> Programs -> Fargo -> Fargo
		Workbench Printer Utility -> Fargo Workbench.
	2.	Select the Fargo Printer to upgrade from the drop-down
		box.
	3.	Go to the Firmware Updates tab.
	4.	If you need to download the update file from the Internet,
		select the Download Firmware button.
	5.	Choose the update file with the Select Firmware button.
	6.	Put your Printer into the upgrade mode. See the
		instructions for your specific Fargo Printer.
	7.	Select the Send Firmware button.
How do I upgrade the Print	Since the Print Server is integrated into the main print
Server Firmware for my	Firmware on the HDP5000, there is not a separate Firmware
HDP5000 Printer?	upgrade for the Printer Server. (Note: Therefore, the
	upgrades are done with the main Printer Firmware.)
What is the default User	The default passwords are blank (i.e., an empty string).
name and password for	•	The default Users are as follows: root as the
the Printer?
		administrative User and guest as a non-administrative
		User.
	•	The HDP5000 supports two (2) Users.

Continued on the next page

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-60