FARGO electronic HDP5000 manual Glossary of Terms

RESTRICTED USE ONLYFargo Electronics, Inc.

Glossary of Terms (continued)

Term	Definition
CR-79	A card dimension standard of 2.0625 L X 3.3125 W (+/-0.002 W,
	+/-0.005 L) or 52.400 X 84.150 mm.
CR-80	A card dimension standard of 2.125 X 3.370 (+/-0.002 W, +/-
	0.005 L) or 53.975 X 85.598 mm.
CR-90	A card dimension standard of 2.375 X 3.625 (+/-0.002 W, +/-
	0.005 L) or 60.325 X 92.075 mm.
CR-100	A card dimension standard of 2.625 X 3.875 (+/-0.002 W, +/-
	0.005 L) or 66.675 X 98.425 mm.
Cursor	The marker in the LCD display Window that indicates the active
	selection.
Darkness	A reference to color saturation.
DB-9	A 9 pin, D-shaped connector, typically used in serial port
	interfaces.
DC Motor	A Motor that works on DC with continuous motion.
DC (Direct Current)	Electronic flow that is unidirectional, flowing from the positive (+)
	to negative (-) of a power source.
Default	A setting or parameter that comes preset from the factory in
	Driver or Firmware. Performance parameters can be customized
	in the Driver, but can be reset to the factory values usually
	through the push of the default button. The default values for the
	Firmware are usually denoted on a label attached to the Printer.
Defrag	Abbreviation for defragmenting. The process of positioning the
	data in contiguous sections on a hard drive so that it uses space
	more efficiently.
DIP switches (Dual	A small array of mechanical switches installed on the Board that
In-line Package	can be configured to change Printer operations including
Switches)	providing a variety of self-tests.
	Continued on the next page

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 16-4