FARGO electronic HDP5000 Select Start Settings Printers and Faxes, Your Printer Driver Properties

RESTRICTED USE ONLYFargo Electronics, Inc.

Reviewing Frequently-asked Questions (continued)

Question		Answer
How do I reconfigure my	Use the Windows “Add Printer Wizard” to create a printer
PC Printer Driver to	instance to communicate to the printer at the new IP
connect to a different	address.
Printer or different IP	This may require adding a new “Remote TCP/IP Card
address?
	Printer Port” configured to communicate to the printer at
	the proper IP address.
	See the appropriate Windows documentation for additional
	help.
How can I verify/change	Follow this procedure.
what IP address my	1.	Open the Printer Driver properties window.
installed Printer Driver is
	2.	Select Start -> Settings -> Printers and Faxes ->
expecting to find my
Printer?		[your Printer Driver] -> Properties.
	3.	From the Ports tab, select Configure Port. The Host
		name will indicate IP address of the connected Printer.
		(Note: If this does not match your Printer’s IP
		address, you can change it from this window.)
	4.	Enter the correct IP address.
	5.	Select OK.
	6.	Select Apply.
	7.	Select Close.

Continued on the next page

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-62