FARGO electronic HDP5000 manual Troubleshooting with the LCD Error Message Table

RESTRICTED USE ONLY Fargo Electronics, Inc.

Troubleshooting with the LCD Error Message Table (continued)

LCD Error Message	Cause	Solution
Cover is Open	The Cover was left open.	Ensure that the Cover is
(PC Error Message		properly closed.
No. 46)
E-Card Encoder	A problem was detected	Reset the Printer and try
Startup Error	during Printer start-up.	again. If this problem persists,
(PC Error Message		call for technical assistance.
No. 141)
E-Card Startup Error	A problem was detected	Reset the Printer and try
(PC Error Message	during Printer start-up.	again. If this problem persists,
		call for technical assistance.
No. 141)
EEPROM Corrupt	EEPROM restored with	If changes were made, then go
(PC Error Message	factory default values.	into the setting values and
		reset these numbers.
Nos. 38, 39, 40, and
144)
Ejecting Card	The card has been ejected	Click OK to clear the
(PC Error Message	already.	message. The user might want
		to know that a card has been
No. 72)
		sent to the reject bin, or out of
		the printer, and is either
		incomplete or posses a
		security risk if not disposed of
		properly.

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-7