FARGO electronic HDP5000 manual Reviewing the Lamination Module Boot-up Sequence

RESTRICTED USE ONLY Fargo Electronics, Inc.

Reviewing the Lamination Module Boot-up Sequence

Step Process

1The Lam Headlift turns until the head up position is returned from Headlift Sensor.

2The Lamination Ribbon Motor activates. (Note: The RFID determine the presence of a roll of lamination.)

3The Card Sensor checks for the presence of a card and ejects it if found.

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 1-6