FARGO electronic HDP5000 manual Removing the Output Side Upgrade Cover

RESTRICTED USE ONLY Fargo Electronics, Inc.

Installation and Removal Procedures Flipper and Lamination Modules

Removing the Output Side Upgrade Cover

Tools needed: Press the Release tab with a flat blade. Use the Snap and Clip process.

Estimated Repair Time: 1 minute

Step Procedure

1

Caution: Power off the Printer by unplugging the power cord from the Printer.

2Press the release tab in back while simultaneously pulling at the center of the bottom edge.

3Reverse instructions to re-assemble. Leave it off if your printer is upgraded for the Flipper or Lamination Module.

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 4-4