FARGO electronic HDP5000 manual Switching to the Automatic IP Address Mode, Step

RESTRICTED USE ONLY Fargo Electronics, Inc.

Switching to the Automatic IP Address Mode

Step Procedure

1Select the Network link from any web page of the Printer.

2Select the Obtain an IP address automatically radio button to enable the DHCP/BOOTP, which automatically assigns the network settings.

Even with this button selected, the User can enter Stored Settings, and the Stored Settings will remain in memory. See below. (Note: This is the default method.)

3Click on the Submit button to save this setting.

4Login as a root User if you are so prompted. (Note: Any change of setting will only be accepted after you have successfully logged in.)

5Reboot the Printer to affect this change.

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-19