FARGO electronic HDP5000 manual Using the Bit Density dropdown list

RESTRICTED USE ONLY Fargo Electronics, Inc.

Using the Bit Density dropdown list

Use this option to customize the Bit Recording Density (Bits per Inch) used to encode the magnetic data on the currently selected track.

The default ISO Standard selections for this option are as follows:

Step Procedure

1• Select 75 BPI to change the bits per inch to 75 BPI. (Note: This is the default for Track 2.)

OR

•Select 128 BPI to change the bits per inch to 128 BPI.

OR

•Select 210 BPI to change the bits per inch to 210 BPI. (Note: This is the default for Tracks 1 and 3.)

OR

•Select Custom BPI, which enables the custom BPI text box. (Note: The lower limit is 75 and upper limit is 210.)

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-72