FARGO electronic HDP5000 manual Adjusting the Image Position controls

RESTRICTED USE ONLY Fargo Electronics, Inc.

Adjusting the Image Position controls (continued)

The display (below) represents how the printed image will move in relation to the fixed card position as positive and negative image placement values are entered.

Step Procedure

2Follow these instructions:

•Use the Vertical adjustment to move the image toward the front of the Printer if a positive number is entered and toward the rear of the Printer if a negative number is entered.

OR

•Use the Horizontal adjustment to move the image toward the card output side of the Printer if a positive number is entered and toward the card input side of the Printer if a negative number is entered.

(Note: The maximum value for the Vertical and Horizontal adjustments is ±100 Pixels (10 Pixels = 0.03 (.8mm).)

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-53