Craftsman 536.886141 manual Parts packed separately in carton not shown full size, Adjust

1- Screw, 5/16-18 x 2 In. 3 - Carriage Bolts, 5116-18x1.00 In.

Parts packed separately in carton (not shown full size)

2- Ignition Keys

(Attached to engine in plastic bag)

1 - container 5W30 oil

I - Snow Chute Assembly

1 - Crank Assembly

CAUTION: Always wear safety

glasses or eye shields while assembling snow thrower.

TOOLS REQUIRED FOR ASSEMBLY

1 - Knife to cut carton and plastic ties

2 - 112 inch wrenches (or adjustable wrenches)

2 - 9/!6 inch wrenches (or adjustable wrenches)

2 - 3/4 inch wrenches (or adjustable wrenches)

1 - Pliers (to spread cotter pin)

1 - Measuring tape or ruler

The figure below shows the snow thrower in the shipping carton.

Lower handl

Clutch

The figure below shows the snow thrower completely assembled.

References to the right or left hand side

of the snow thrower are from the viewpoint of the operator'sposition behind the unit.

Auger driv_ lever	drive lever
	cable
	assembly
Shifter
lever

Upper handle

Height

adjust

skids

assembly

5