17.Disengage power to the auger/impeller when snow thrower is transportedor not in use.
18.Use only attachmentsand accessories
approvedby the manufacturerof the snow thrower (such as tire chains, electric _Jtartkits, etc,).
19.Never operate the snow thrower
without good visibili_ or light. Always be sure of your footing, and keepa firm hold on the handles.Walk; never run.
MAINTENANCE AND STORAGE
Check shear bolts and other bolts
frequently for proper tightness to be sure the snow thrower is in safe
working condition.
2.Never store the snow thrower with fuel in the fuel tank inside a building where
ignition sources are present such as hot water and space heaters, clothes dryers, and the like. Allow the engine to cool before storing in any enclosure.
3.Always refer to operator's manual instnJctions for important details if the snow thrower is to be stored for an
extended period_
Contents of Parts Bag (actual size)
1 - Owner'sManual (not shown)
1 - Packet of Fuel Stabilizer (not shown)
1 - Warranty Card (not shown)
2 - Parts Bags (not shown)
in tool box located on belt cover.
4o Maintain or replace safety and instruc tion labels, as necessary.
5.Run the snow thrower a few minutes afferthrowing snow to prevent freeze- up of the augedimpelter.
A
WARNING: This snow thrower is for use on sidewalks, driveways and other ground level surfaces°
Caution should be exercised while using on
steep sloping surfaces. DO NOT USE SNOW THROWER ON SURFACES
ABOVE GROUND LEVEL such as roofs of residences, garages, porches or other such structures or buildings.
D
1 | 1- Nut, |
*2 - Spare Spacers
*2 - Shear Pins | 1 - Starter Motor Cord 10Ft. |
|
3 | 4 - Flatwashers 11132 In. |
|
__1. | Nut, | I |
1- Shifter Knob |
| |
|
|
4
