TROUBLE | ,, ,CAUSE . | ..... |
| • | CORRECT!ON |
Difficult starting | Defective spark plug |
|
| Replace defective plug | |
| Water or dirt in fuel system |
|
| Use carburetor bowl drain to | |
|
|
| flush and refill with fresh fuel | ||
|
|
|
|
| |
| ,, | , ,,, , , ,, ,, , ,, | ,,, |
| .......,, ,, ,,,,,,,, ,, , , , |
Engine runs er- Blocked fuel line or low on fuel ratically
Engine stalls Unit running on CHOKE
Engine runs er- Water or dirt in fuel system
ratically; or
Loss of power
Clean fuel line; check fuel sup- ply; add fresh gasoline (gaso- line/oil mixture if
Move choke lever to OFF position
Use carburetor bov¢l drain t0 ......
flush and refill with fresh fuel
Excessive vibration
Units fails to
propel itself
iUnit fails to
discharge snow
Loose parts; damaged impeller
Drive belt loose or damaged
Incorrect adjustment of auger con- trol cable
Wom or damaged friction wheel
Auger drive belt loose or dam- aged
Auger control cable not adjusted correctly
Shear bolt broken
Discharge chute clogged
Stop engine immediately and disconnect spark plug wire. Tighten all bolts and make all necessary repairs. If vibration continues, have the unit ser- viced by a Craftsman service repairman
Replace drive belt
Adjust traction drive cable
Repair friction wheel
Replace auger belt
Adjust auger control cable
Replace with shear pin located in tool box on belt cover,
Stop engine immediately and disconnect spark plug wire, Clean discharge chute and in- side of auger housing,
Foreign object lodged in auger
Stop engine immediately and dis- connect spark plug wirer Remove object from auger.
23
