2.Disengage all clutches before starting the engine (motor).
3.Do not operate the snow thrower without wearing adequate winter outer garments. Wear footwear that wilt improve footing on slippery suffaces_
4.Handle fuel with care; it is highly flammable.
(a)Use an approved fuel container.
(b)Never remove fuel tank cap or add fuel to a running engine or hot
engine.
(¢) Fill fuel tank outdoors with extreme care_ Never fill fuel tank
indoors.
(d)Replace fuel tank cap securely and wipe up spilled fuelo
(e)Never store fuel or snow thrower with fuel in the tank inside of a
building where fumes may reach an open flame or spark,
(f)Check fuel supply before each use, allowing space for expansion as the heat of the engine (motor) and/or sun can cause fuel to
expand.
5.Use extension cords and receptacles as specified by the manufacturer for all snow throwers with electric drive motors or electric starting motors.
6.Adjust the snow thrower height to clear gravel or crushed rock surfaces.
7.Never attempt to make any adjust- ments while the engine (motor) is running (except when specifically recommended by the manufacturer).
8.Let engine (motor) and snow thrower adjust to outdoor temperatures before starting to clear snow.
9.Always wear safety glasses or eye shields during operation or while performing an adjustment or repair to protect eyes from foreign objects that may be thrown from the snow thrower,
OPERATION
Do not operate this machine if you are taking drugs or other medication which can cause drowsiness or affect your ability to operate this machine.
2.Do not use this machine if you are mentally or physically unable to operate this machine safely.
3.Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times.
4.Exercise extreme caution when oper-
ating on or crossing gravel drives, walks, or roads. Stay alert for hidden hazards or traffic.
5.After striking a foreign object, stop the engine (motor), remove the wire from the spark plug, disconnect the cord on electric motors, thoroughly inspect the snow thrower for any damage, and repair the damage before restarting operating the snow thrower.
6.If the snow thrower should start to
vibrate abnormally, stop the (motor) and check immediately for the cause.
Vibration is generally a warning of trouble°
7.Stop the engine (motor) whenever you leave the operating position, before unclogging the auger/impeller housing or discharge guide, and when making any repairs, adjustments, or inspec- tions.
8.When cleaning, repairing, or inspecting, make certain the auger/impeller and all moving parts have stopped. Disconnect
the spark plug wire and keep the wi:re away from the plug to prevent acciden- tal starting.
9.Take all possible precautions when leaving the snow thrower unattended.
Disengage the auger/impeller, stop engine, and remove key.
10.Do not run the engine indoors, except when starting the engine and for transporting the snow thrower in or out of the building. Open the outside doors; exhaust fumes are dangerous (contain_ ing CARBON MONOXIDE, an ODOR- LESS and DEADLY GAS).
11.Do not clear snow across the face of slopes. Exercise caution when changing direction on slopes. Do not attempt to clear steep slopes.
12.Never operate the snow thrower without proper guards, plates or other safety protective devices in place.
13.Never operate the snow thrower near glass enclosures, automobiles, window wells,
ischarge angle. Keep children and pets away.
14o Do not overload the machine capacity by attempting to clear snow at too fast
arate.
15.Never operate the snow thrower at high transport speeds on slippery surfaces_ Look behind and use care when
backing.
16.Never direct discharge at bystanders or allow anyone in front of the snow thrower.
