GEAppliances.com

Problem

 

Possible Causes

What To Do

 

 

 

 

Oven—All Models

 

 

 

Oven light does not work

 

Light bulb is loose or defective.

• Tighten or replace the bulb.

 

 

 

 

 

Switch operating light is broken. • Call for service.

 

 

 

 

Oven will not work

 

Plug on range is not completely

• Make sure electrical plug is plugged into a live, properly

 

 

inserted in the electrical outlet.

grounded outlet.

 

 

 

 

 

 

A fuse in your home may

• Replace fuse or reset circuit breaker.

 

 

be blown or the circuit

 

 

 

breaker tripped.

 

 

 

 

 

 

 

Oven controls improperly set.

• See the Using the oven section.

 

 

 

 

 

 

On self-cleaning models,door

• If necessary, allow the oven to cool then unlock the door.

 

 

left in the locked position.

 

 

 

 

 

Food does not bake

 

Oven controls improperly set.

• See the Using the oven section.

or roast properly

 

 

 

 

Rack position is incorrect or the

• See the Using the oven section.

 

 

 

 

rack is not level.

 

 

 

 

 

 

 

Incorrect cookware or cookware

• See the Using the oven section.

 

 

of improper size being used.

 

 

 

 

 

 

 

Oven thermostat needs

• See the Adjust the oven thermostat–Easy to do yourself!

 

 

adjustment.

section.

 

 

 

 

Food does not

 

Oven is not set to BROIL.

• On models with a temperature knob, make sure you turn

broil properly

 

 

it all the way to the BROILposition. On models with a

 

 

 

BROIL HI/LO pad, make sure it is turned on.

 

 

 

 

 

 

Improper rack position

• See the Broiling guide.

 

 

being used.

 

 

 

 

 

 

 

Food being cooked in a hot pan.

• For best results, use a pan designed for broiling.

 

 

 

Make sure it is cool.

 

 

 

 

 

 

Cookware not suited for broiling.

• For best results, use a pan designed for broiling.

 

 

 

 

 

 

In some areas the power

• Preheat the broil element for 10 minutes.

 

 

(voltage) may be low.

• Broil for the longest period of time recommended in

 

 

 

the Broiling guide.

 

 

 

 

Control signals after

 

You forgot to enter a bake

• Press the BAKEpad and desired temperature or the

entering cooking time

 

temperature or cleaning time.

SELF CLEANpad and desired clean time.

or delay start

 

 

 

 

 

 

 

Display flashes "bAd"

 

The installed connection

• Contact installer or electrician to correct miswire.

then "linE" with a

 

from the house to the unit

 

loud tone

 

is miswired.

 

 

 

 

 

Warming drawer will

 

A fuse in your home may be

• Replace the fuse or reset the circuit breaker.

not work

 

blown or the circuit breaker

 

 

 

tripped.

 

 

 

 

 

 

 

The oven is self-cleaning.

• Wait for the self-clean cycle to finish and the oven

 

 

 

to cool.

 

 

 

 

 

 

Controls improperly set.

• See the Using the warming drawer section.

 

 

 

35

Safety Instructions OperatingInstructions Care and Cleaning Troubleshooting Tips Consumer Support

Page 35
Image 35
GE RB758 Oven-All Models, Tighten or replace the bulb, Switch operating light is broken. Call for service, Grounded outlet