FARGO electronic HDP5000 manual Defining the Area to activate the Card Grid

RESTRICTED USE ONLY Fargo Electronics, Inc.

Defining the Area to activate the Card Grid

Step Procedure

1Select on the appropriate Defined Area (see below) to activate the card grid in the upper half of the window.

•It is through this card grid that up to five areas can be defined, as shown below.

•When the card grid is first activated, then a small black square will appear at its default size of .2 x .2 (5mm x 5mm) and at its default location in the lower left-hand corner (0,0). (Note: This square represents the first defined area.)

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-95