FARGO electronic HDP5000 manual Adjusting the Film Type

RESTRICTED USE ONLY Fargo Electronics, Inc.

Adjusting the Film Type

Step Procedure

1Allows you to select the film type option that is appropriate for the type of HDP film currently loaded in the Printer.

•Select the Clear option to automatically adjust the appropriate transfer time and temperature to pre-determined defaults. (Note: Select this option to automatically adjust the transfer temperature (175.0 Celsius) and the dwell times (2.0 seconds per inch) to defaults when non-custom card type is chosen on Card tab.)

OR

•Select the Holographic option to change appropriate internal Printer settings needed to make the holographic film work. (Note: Select this option to automatically adjust the transfer temperature (175.0 Celsius) and the dwell times (2.0 seconds per inch) to defaults when non-custom card type is chosen on Card tab.)

(Note: It will also adjust the necessary transfer temperature and the dwell settings in the Driver to provide the optimal holographic InTM performance.)

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-28