Philips SRU5060 manual Extra possibilities, Adjusting device selection Mode selector

English

Instructions for use

•If the device does not respond at all, or not to all of the key commands, follow the instructions under ‘Setting the remote control’. It is possible that you must enter another code for the device.

4. Extra possibilities

Adjusting device selection (Mode selector)

The SRU 5060 is default set for operating TV,VCR, CD, DVD, STB (settop box, satellite or cable decoder) and AMP (amplifier).You can select the device you wish to operate with the SELECT key (mode selector). Each option allows operation of one device only. If desired, you can program the SELECT key (mode selector) to select a different kind of device. For example, if you want to operate a second TV. In the following example you will see how to configure the DVD key for a second TV.

1Switch on the second TV.

2Press the SELECT key to select STB. Press the key until STB lights up in the selector window.

3Then keep keys 1 and 6 on the SRU 5060 pressed simultaneously for three seconds, until STB in the selector window lights up.

4Press keys 9, 9 and 2 in that order.

5Press the SELECT key to select TV. Press the key until the light around the Standby key lights up.

6Press the 1 key.

–STB in the selector window flashes twice. STB will now allow you to operate your

second TV.

7Program the SRU 5060 to operate the second TV.

See ‘Setting the remote control’.

8