FARGO electronic HDP5000 manual Adjusting the Lamination Speed Transfer Dwell Time

RESTRICTED USE ONLY Fargo Electronics, Inc.

Adjusting the Lamination Speed - Transfer Dwell Time

Step Procedure

1Adjust the Transfer Dwell Time to control the Lamination Dwell Time or through-put speed of a card in seconds per inch and the Lamination Temperature.

•Default = 2.0 seconds per inch

•Upper Limit = 5.5 seconds per inch

•Lower Limit = 0.8 seconds per inch

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-82