Clock setting
The AUTO CLOCK function will automatically set the
POWER
DVD/VCR
CALL
ENTER
SET +/Ð
VCR MENU
DVD/VCR SELECT
AUTO CLOCK setting
Preparation:
¥Turn ON the TV and select the corresponding video input.
¥Press DVD/VCR to operate the DVD/VCR.
¥Press DVD/VCR SELECT to select the VCR mode. (The VCR indicator will light.)
1Connect the Antenna or Cable system.
¥If you use a cable box, turn it on.
2Plug the AC power cord to the AC outlet.
3Make sure the DVD/VCR is turned off.
¥Depending on the reception condition it may take approx. thirty minutes.
¥If you press POWER, the Auto Clock set is not programmed.
4Wait at least three minutes and press POWER.
5Press CALL to check the clock setting on the on screen display.
8 : 47AM MON | CH 125 |
STEREO SAP |
|
| 00 : 00 : 00 SP |
6If the clock is not set, check the antenna condition. The AUTO CLOCK may not
function properly if the reception condition is not good.
AUTO CLOCK adjustment
The auto clock adjustment will be updated at 6:00 AM, 12:00 PM and 6:00 PM everyday when the DVD/ VCR turned off.
¥If you use a cable box and you want AUTO CLOCK adjustment to be performed, the cable box must be left on.
¥The AUTO CLOCK adjustment is not effective when there is a difference of more than 5 minutes exists between the
To set AUTO CLOCK to off
When shipped from factory the AUTO CLOCK is set to ÒONÓ. |
| |||||
But if you do not want AUTO CLOCK setting: |
| Basicsetup | ||||
1 Press VCR MENU. | ||||||
|
|
| (VCR) | |||
|
|
| ||||
|
|
|
| |||
| Press SET + or Ð to select ÒSYSTEM SETUPÓ, |
| ||||
2 then press ENTER. |
|
|
| |||
|
|
| ||||
|
|
|
| |||
| Press SET + or Ð to select ÒAUTO CLOCKÓ. |
| ||||
3 |
|
| ||||
|
|
|
|
|
| |
|
|
|
| |||
4 Press ENTER to select ÒOFFÓ. |
| |||||
|
|
|
| |||
|
|
|
|
5 Press VCR MENU repeatedly to return to the normal screen.
¥ When the AUTO CLOCK is set to ÒOFFÓ, the AUTO CLOCK adjustment does not function. Set the clock manually .
29
29 | 21/3/06, 9:43 AM |