Toshiba SD-V594SC Connections, Picture Output ¥DVD Mode, ¥VCR Mode, <During HDMI Output>

The content of the output for each output jack are as shown in the following table and differ depending on User settings/operation.

	USER setting/operation				Content of output for each output jack
Mode		HDMI	Output	HDMI	Video	S-Video	Component	RF
		Output
VCR/DVD			Setting					Modulator
		*1
		Off	Interlace	-		DVD	480i (DVD)
			Progressive			-	480p (DVD)
		480p		480p (DVD)
VCR		720p	Interlace	720p (DVD)	VCR	-	-	VCR
		1080i		1080i (DVD)
		480p	Progressive	480p (DVD)		-	-
		720p		720p (DVD)
		1080i		1080i (DVD)
		Off	Interlace	-	DVD	DVD	480i (DVD)	DVD
			Progressive		DVD	-	480p (DVD)
		480p		480p (DVD)
DVD		720p	Interlace	720p (DVD)	-	-	-
		1080i		1080i (DVD)				-
		480p		480p (DVD)	-	-	-
		720p	Progressive	720p (DVD)
		1080i		1080i (DVD)

Connections

*1: Settings for HDMI output format are performed using the ÒHDMIÓ key on the remote control.

3 Picture Output

¥DVD Mode

The following refers to instructions for Picture Output in DVD Mode. There is no Analog Output (*2) for HDMI output.

When HDMI output setting is ÒOffÓ, there is no HDMI output.

*2: Output from Video out jack/S-Video out jack/Component out jacks

¥VCR Mode

The following refers to instructions for Picture Output in VCR mode.

This set outputs the picture from the Video out jack in VCR mode. However, please see the following instructions for HDMI out jack/S-Video out jack/Component out jacks.

<During HDMI Output>

DVD picture is always output from HDMI out jack during HDMI Output, but it cannot output from S-Video out jack/Component out jacks during HDMI Output.

<When HDMI Output setting is ÒOffÓ>

When the HDMI output setting is ÒOffÓ, this set outputs picture signals as follows according to the HDMI Setting in the Setup Menu. When HDMI Output setting is ÒOffÓ, HDMI output does not function.

When the Output setting is ÒInterlaceÓ:	Picture from VCR is output from the Video out jack
	Picture from the DVD is output from the S-Video out jack/Component out jacks
When Output setting is ÒProgressiveÓ:	Picture from VCR is output from the Video out jack
	NO OUTPUT from the S-Video out jack
	Picture from the DVD is output from the Component out jacks

Notes:

¥When in DVD Mode/outputting HDMI signal, it is impossible to output any video images from either the Video out jack/S-Video out jack/Component out jacks.

If the viewer would like to view videos using the Video out jack/S-Video out jack/Component out jacks, then the HDMI output must set to ÒOffÓ by pressing the HDMI button on the remote control.

¥When the HDMI Cable is connected, if the HDMI is pressed or the VCR Mode is switched to DVD Mode, there is a possibility that the monitor will not show any output images. In this case, turn off the HDMI mode.

Deactivate HDMI output with HDMI (For details, please refer to ÒSwitching the video quality (HDMI mode) using HDMI

button on the remote controlÓ ).

¥Refer to the OwnerÕs manual of the connected TV as well.

¥When connecting the DVD/VCR to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any connections.

¥If you have an HDMI (with HDCP) equipped monitor or display, you can connect it to the DVD/VCR using the HDMI cable.

¥The HDMI connector outputs uncompressed digital video as well as almost every kind of digital audio that the DVD/VCR is compatible with, including DVD-Video, Video CD, Audio CD and MP3/WMA/JPEG/DivX¨ files.

¥No sound will be output from the HDMI cable if the ÒDigital OutÓ is not set to ÒPCMÓ ￿￿.

23

2I40301A-En_p18-27 23 21/3/06, 9:42 AM