Basic setup (VCR)
Tuner setting
This DVD/VCR is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the DVD/VCRÕs memory. In addition to normal VHF and UHF channels, this DVD/VCR can receive up to 113 Cable TV channels. To use this DVD/VCR with an antenna, set the TV/CABLE menu option to the TV mode. When shipped from the factory, this menu option is in the CABLE mode.
DVD/VCR
ENTER
SET +/Ð
VCR MENU
DVD/VCR SELECT
TV/CABLE selection
Preparation:
¥Turn ON the TV and select to the corresponding video input.
¥Press DVD/VCR to operate the DVD/VCR.
¥Press DVD/VCR SELECT to select the VCR mode. (The VCR indicator will light.)
1 Press VCR MENU. Press SET + or Ð to select ÒCH SETUPÓ, then press ENTER.
2Press SET + or Ð to select ÒTV/CABLEÓ.
|
| |
Press ENTER to select the TV or CABLE | ||
3 mode. | ||
| The arrow indicatestheselectedmode. | |
TV | - VHF/UHF channels |
|
CABLE | - Cable TV channels |
4Press VCR MENU until the menu screen is cleared.
Note:
You canÕt select ÒCH SETUPÓ if you set the channel to ÒL1Ó or ÒL2Ó.
32
Setting channels automatically
1Repeat left step 1 and pressSET+ orÐ to select ÒAUTO CH MEMORYÓ.
〈〉
2 Press ENTER.
Auto tuning will begin. The channel dis- play will count up and when finished,
the screen returns to normal.
32 | 21/3/06, 9:43 AM |