Function setup (DVD)
Customizing the function settings (Continued)
Setting details
ParentalEMenuDRC.B.L. | : OffEnglish | ||
PasswordTVSubtitleQSoundScr en | : Cha4:3EOng |
| he |
nglis | |||
| |||
HDDisplayAudioJpeg | : OffEnglish | ||
OutputPic ure Mode | : AutoInterlace | ||
DivX(R)JPEG IntervalVOD | : Display5 Seconds | ||
Screen Saver | : On | ||
Parental control setting
Some discs are specified not suitable for children. Such discs can be limited not to play back with the unit.
1)Press C or D to select ÒParentalÓ, then press ENTER. ÒEnter PasswordÓ screen will appear.
2)Press Ò0000Ó using Number buttons (0Ð9). (Please note, this is
¥Level Off: The parental control setting does not function.
¥Level 8: Virtually all DVD software can be played back.
¥Level 1: DVD software for adults cannot be played back.
3)Press C or D to select from the level 1 to level 8. The limitation will be more severe as the level number is lower. Then press ENTER.
4)Press OPEN/CLOSE to activate Parental control setting.
Notes:
¥Depending on the discs, the unit cannot limit playback.
¥Some discs may not be encoded with specific rating level information though its disc jacket says Òadult.Ó For those discs, the age restriction will not work.
¥The password is required every time when you change the parental level.
¥If you input a wrong number, press CLEAR.
If you forget the password...
1)Press OPEN/CLOSE to open the disc tray.
2)Remove the disc.
3)Press OPEN/CLOSE again to close the disc tray. ÒNo DiscÓ appears on the screen.
4)While holding 7 down on the remote control and at the same time press STOP on the front panel. ÒPassword ClearÓ appears on the screen. Now the password has been returned to the initial value (Ò0000Ó).
HD Jpeg
This DVD/VCR equipped with a ÒHD JpegÓ. It can display the HD resolution JPEG images when the DVD/VCR is connected to a HDTV using HDMI.
On:
Select when you connect the DVD video player to a HDTV via HDMI OUT jack. JPEG images is dis- played in suitable picture quality (480p, 720p or
1080i) 
.
Off:
The picture processing quality is fixed to 480p.
Notes:
¥When the DVD/VCR is not connected to a TV using HDMI, you cannot select ÒOnÓ.
¥When HD Jpeg is set to ÒOnÓ, zoom function is prohibited and component video outputs disabled when 480p, 720p or 1080i is selected.
Set the new password
1)Press C or D to select ÒPasswordÓ, then press ENTER. ÒEnter Current PasswordÓ screen will appear.
2)Press Number buttons (0Ð9) to input the current password (If the password has not been set yet after you purchase this unit, it is Ò0000Ó).
3)Then press ENTER. ÒEnter New PasswordÓ screen will appear. Press Number buttons (0Ð9) to input the new password.
4)Press ENTER. Now your new password has been set. Be sure to remember this number!
68
68 | 21/3/06, 9:46 AM |
