Connections
Connecting to a TV
Connect the DVD/VCR to your TV.
Note: This method transports VHS and
Basic connection
Signal flow
(yellow) (red) | (white) |
To wall outlet To VIDEO | To ANALOG AUDIO OUT |
OUT |
|
Audio/video cable (supplied) | |
To video input | To audio inputs |
(yellow) | (red) | (white) |
¥ Make sure following setting.
Select: | Page | |
|
|
|
ÒDigital OutÓ | ÒPCMÓ or ÒBitstreamÓ | |
|
|
|
TV or monitor with audio/video inputs
Notes:
¥Refer to the ownerÕs manual of the connected TV as well.
¥When you connect the DVD/VCR to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any connections.
¥If your television set has one audio input, connect the left and right audio outputs of the DVD/VCR to a Y cable adapter (not supplied) and then connect to your TV.
¥Connect the DVD/VCR directly to your TV. If you connect the DVD/VCR to a VCR, TV/VCR combination or video selector, the playback picture may be distorted as DVD video discs are copy protected.
¥While HDMI is being output in the DVD mode, it is impossible to output from the Video out jack,
20
20 | 21/3/06, 9:42 AM |