Other functions (VCR)
Stereo recording and playback/
Second Audio Program (SAP)
ENTER
SET +/Ð
VCR MENU
AUDIO SELECT
Stereo recording and playback | Second Audio Program (SAP) |
The VHS
When a MTS STEREO broad- cast is received, ÒSTEREOÓ will appear on the screen for about STEREO 4 seconds and the program can
be viewed or recorded in stereo. The
Note:
When using a Cable TV system, stereo TV programs may be transmitted over a mono cable channel. In this case ÒSTEREOÓ will not appear and the sound will be in mono.
Output selection
When viewing an MTS stereo TV program, or playing a prerecorded VHS
OUTPUT | SOUND HEARD ON BOTH |
SELECTION | SPEAKERS |
|
|
STEREO | STEREO |
L ch | LEFT CHANNEL AUDIO |
R ch | RIGHT CHANNEL AUDIO |
MONO | MONO |
|
|
44
Your DVD/VCR is fitted with a SAP broadcast system which enables you to switch to a second audio program when view- ing a selected channel.
This function applies only when the program is broadcast in
1Press VCR MENU. Then pressSET +orÐ to
select ÒSAPÓ.
2 Press ENTER to select ÒONÓ.
Then press VCR MENUuntilthe menu screen is cleared.
Listening to SAP
When the VCR is turned on or a channel selection is made, make certain the letters ÒSAPÓ appears on the screen for about 4 seconds. This means that the ÒSecond AudioProgramÓ broadcasting is available.
OR
Notes:
¥When playing back a tape that is not recorded in
¥When listening to a VHS
44 | 21/3/06, 9:44 AM |