Toshiba SD-V594SC To ADD/DELETE channels, Noise elimination, Enter, To Add or Delete channels

To ADD/DELETE channels

1 Repeat the step 1 on page ￿￿. Then￿￿￿￿￿￿￿￿press SET + or Ð to select the ÒADD/DELETEÓ ￿￿￿￿and￿￿￿￿press￿￿￿￿

ENTER.

￿￿￿￿￿￿￿￿￿￿￿￿￿￿

2 To Add or Delete channels

1) Press Direct channel selection buttons (0Ð9) or SET +/Ð to select a channel number you want to add or delete.

2) To add channels

Press ENTER until ÒADDÓ appears on the screen.

To delete channels

Press ENTER until ÒDELETEÓ appears on the screen. The channel number will blink.

3) Repeat step 1 and 2 to add or delete￿￿￿ other ￿￿￿￿￿

channel.

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

0Ð9

ENTER

SET +/Ð

VCR MENU

Noise elimination

When you don't want to receive a weak signal broadcast, a Blue back screen can be obtained by selecting the NO NOISE BACK- GROUND to ÒONÓ. When the unit is shipped from the factory, the NO NOISE BACKGROUND is set to ÒONÓ.

1 Repeat the steps 1~2 on page ￿￿￿￿￿￿and￿￿￿￿￿press￿￿

SET + or Ð to select ÒNO NOISE BACKGROUNDÓ￿￿￿￿￿￿￿￿￿￿￿ .

￿￿￿￿￿

〈￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿〉

2Press ENTER to select ÒONÓ or ÒOFFÓ￿￿￿￿￿￿￿￿￿￿position.￿￿￿￿￿￿￿￿￿

￿￿￿￿￿￿￿￿￿￿

〈￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿〉

3Press VCR MENU until the menu screen is cleared.

Basic setup (VCR)

3Press VCR MENU until the menu screen is cleared.

33

2I40301A-En_p28-33 33 21/3/06, 9:43 AM