Starting up and operation | Controls and displays |
5.1.2Rear of server
Indicators on connection panel (global error indicator and ID indicator)
1
2
Figure 13: Global error indicator and ID indicator
1ID indicator (blue)
Lights blue when the system has been selected by pressing the ID button on the front. To deactivate, press the button again.
The ID indicator on the front also lights up at the same time. The two ID indicators are synchronized.
The ID indicator can also be activated via ServerView and its status reported to ServerView.
2Global Error indicator (red)
Does not light up when the system is OK. No service incident or critical event has occurred.
Lights up red when a predictable error has been detected. Users can check the system and event log or via ServerView for more detailed information. Flashes red when a critical event has occurred. Users can check BIOS Setup, system- and eventlog or via ServerView for event details.
If the event is still acute after a power failure, the indicator is activated after the restart.
RX330 S1 | Operating manual | 53 |
