Starting up and operation | Configuring the server |
5.3.2Configuration with ServerStart
With the ServerStart Disc 1 provided, you can configure the server and install the operating system in a convenient manner.
The ServerStart advantages
–Automatic configuration of your server’s hardware and disk arrays.
–Installation assistance for all leading server operating systems.
–Creation of configuration files for unattended installation of several PRIMERGY servers with identical hardware configurations.
–Installation of drivers and additional software.
IThe software that can be installed depends on your server’s hardware configuration. This configuration is detected automatically.
IDescriptions of operating systems not covered in the RAID controller manual are provided in the appropriate readme files on the driver CDs.
To find out how to operate ServerStart and for further information, refer to the corresponding manual (see “Literature” on page 87).
If you are using ServerStart, you can skip the following section on how to configure the server and install the operating system. Continue from the “Cleaning the server” on page 60 section.
RX330 S1 | Operating manual | 59 |
