Server switches itself off | Troubleshooting and tips |
7.2Server switches itself off
Server Management has detected an error
ÊCheck the error list or the ErrorLog file in the ServerView program, and attempt to eliminate the error.
7.3Screen remains blank
Monitor is switched off
ÊSwitch on your monitor.
Screen has gone blank
ÊPress any key on the keyboard. or
ÊDeactivate screen saver. Enter the appropriate password.
Brightness control is set to dark
ÊSet the brightness control on the monitor to light. For detailed information, refer to the operating manual supplied with your monitor.
Power cable or monitor cable not connected
ÊSwitch off the monitor and the server.
ÊCheck whether the power cable is properly connected to the monitor and to the grounded socket.
ÊCheck whether the monitor cable is properly connected to the server and monitor (if it is plugged in with a connector). If a separate graphics card is installed in the server, then the monitor cable must be connected to the graphics card.
ÊSwitch on the monitor and the server.
64 | Operating manual | RX330 S1 |
