Fujitsu RX330 manual Remove the dummy module, Hot-plug power supply units

Hot-plug power supply units Hot-plug components

8.1.1Remove the dummy module

The mounting location for the second hot-plug power supply unit contains a dummy module. This dummy module must be removed before installing a second power supply unit.

2

1

Figure 16: Remove the dummy module

ÊLoosen the fixing screw (1) and remove the dummy module from the second power supply mounting location (2).

VCAUTION!

Store the dummy module in a safe place. If the power supply unit is removed and not replaced with a new unit, the dummy module must be reinstalled due to cooling, to comply with applicable EMC regulations (regulations on electromagnetic compatibility) and to protect against fire.

70 Operating manual RX330 S1