7 Troubleshooting and tips
VCAUTION!
Follow the safety instructions in the “Safety notes and other important information” manual and in the “Important information” on page 21 chapter.
If a fault occurs, attempt to resolve it using the measures described:
–in this chapter,
–in the documentation for the connected devices,
–in the help systems of the software used.
If you fail to correct the problem, proceed as follows:
ÊMake a list of the steps performed and the circumstances that led to the fault. Also make a list of any error messages that were displayed.
ÊSwitch off the server.
ÊContact our customer service team.
7.1Power-on indicator remains unlit
The
Power cable incorrectly connected
ÊMake sure that the power cable(s) is/are correctly connected to the server and the grounded socket(s).
Power supply overloaded
ÊDisconnect the server power plug(s) from the power socket(s).
ÊWait a few seconds before you plug it/them into the grounded socket(s) again.
ÊSwitch on your server.
RX330 S1 | Operating manual | 63 |
