Hardware installation | Connecting the server to the mains |
4.4Connecting the server to the mains
In its basic configuration level the server has a
VCAUTION!
The installed power supply units automatically set themselves to a mains voltage in the range of 100 V - 127 V or 200 V - 240 V. Make sure that your local mains voltage is within the correct range.
2
1
Figure 10: Connecting the server to the mains
ÊConnect the power cable with the insulated connector (1) to the power supply unit of the server, and plug the power plug (2) into a grounded outlet on the mains socket strip on the rack (see the technical manual for the rack).
IA phase redundancy in the power supply of the server can be set up if two hot plug power supply units are installed.
In this case, the two power supply units are connected to two different phases.
RX330 S1 | Operating manual | 47 |