Incorrect date and time | Troubleshooting and tips |
Mouse controller disabled
The mouse controller on the system board must be enabled if you are using the mouse supplied.
ÊCheck in the BIOS Setup that the mouse controller is Enabled.
7.7Incorrect date and time
ÊSet the date and time in the operating system or in the BIOS Setup under the Main menu, using System Date and System Time respectively.
INote that the operating system may affect the system time. For example, the operating system time may deviate from the system time under Linux, and would overwrite the system time in the default setting on shutdown.
If the date and time are still wrong after the server has been switched off and back on again, replace the lithium battery (for a description refer to the Technical Manual for the D2440 system board) or contact our customer service team.
7.8System will not boot
The system will not boot after installing a new hard disk drive.
SAS configuration incorrect
ÊCheck the settings for the hard disk drives (SAS Device Configuration) and the additional settings in the SAS configuration menu.
66 | Operating manual | RX330 S1 |
