Fujitsu RX330 manual Replacing the hot-plug power supply unit

Hot-plug power supply units Hot-plug components

8.1.3Replacing the hot-plug power supply unit

VCAUTION!

Before replacing a non-defective power supply unit in a non-redundant configuration (only one power supply unit present), the server must have been switched off.

ÊRemove the cable of the defective power supply unit.

ÊRemove the defective power supply unit (see section “Installing/removing the hot-plug power supply unit” on page 71).

ÊInstall the new power supply unit in the empty mounting location (see section “Installing/removing the hot-plug power supply unit” on page 71).

IMake sure that the power supply unit engages correctly in the mounting location and is locked in position.

This is the only way to avoid the power supply unit being shaken out of its mountings and damaged during transportation.

ÊConnect the newly installed power supply unit.

72 Operating manual RX330 S1