Fujitsu RX330 Switching the server OFF, Other on/off options, Ring indicator, Wake On LAN WOL

Starting up and operation Switching the server on and off

Switching the server OFF

Power-on indicator (position 10 in figure 11 on page 49) lights green.

ÊShut down the operating system properly.

The server is automatically switched off. The Power-on indicator lights red.

IIf the operating system does not switch the server off automatically, press the On/Off button for at least four seconds and/or send a corre- sponding control signal.

Other on/off options

In addition to the On/Off button, the server can be switched ON and OFF in the following ways:

–Specified switch on time / switch off time

The server is switched ON or OFF at a time specified in the ServerView program

–Ring indicator

The server is switched on by an internal or external modem.

–Wake On LAN (WOL)

The server is switched on by a command via the LAN (Magic Packet).

–After power failure

The server automatically reboots following a power failure (depending of the settings in the BIOS).

–“Power override” function

The server can be switched off immediately by pressing and holding the On/Off button (approx. 4-5 sec.).

VCAUTION!

There is a risk that data may be lost.

RX330 S1 Operating manual 57