Switching the server on and off

Starting up and operation

5.2Switching the server on and off

VCAUTION!

If nothing appears on the screen but flickering stripes after switching on the server, switch the server off immediately (see section “Flickering stripes on monitor screen” on page 65).

The On/Off button does not disconnect the server from the mains. To disconnect from the mains completely, remove the power plug(s).

Switching the server on

The power-on indicator (item 10 in figure 11 on page 49) lights red.

Starting up for the first time:

ÊPress the On/Off button (position 7 in figure 11 on page 49).

The power-on indicator lights up green (item 10 in figure figure 11 on page 49).

ÊInsert ServerStart disc 1 in the CD/DVD drive.

ÊFollow the on-screen instructions (see also section “Configuration with ServerStart” on page 59 or section “Configuration without ServerStart” on page 60).

System already installed:

ÊPress the On/Off button (position 7 in figure 11 on page 49).

The power-on indicator lights up green (item 10 in figure figure 11 on page 49).

The server is switched on, performs a system test and boots the operating system.

56

Operating manual

RX330 S1

Page 56
Image 56
Fujitsu RX330 manual Switching the server on and off, Starting up for the first time, System already installed