Controls and displays | Starting up and operation |
Indicators on the HDD module
HDD BUSY
HDD FAULT
Figure 12: Indicators on the HDD module
LED | HDD BUSY |
green | – lights: HDD in active phase |
| |
| – does not light: HDD inactive (drive inactive) |
|
|
LED | HDD FAULT (in conjunction with a RAID controller) |
red | – does not light: no HDD error |
| |
| – Lit: HDD Faulty or Rebuild Stopped (drive defective/needs |
| replacing, a rebuild process was stopped or the HDD module is |
| not correctly inserted) |
| – Slow flashing: HDD Rebuild (the data is being restored after |
| changing a hard disk drive) |
| – Fast flashing: HDD Identify |
| – four fast blinks/pause: HDD Predicted Fault |
| – Two fast flashes/pause: HDD Hot Spare (Hot spare drive active. |
| The corresponding drive has failed). |
|
|
52 | Operating manual | RX330 S1 |
