Hot-plug components, Hot-plug power supply units | Fujitsu RX330

8 Hot-plug components

This chapter describes how to handle the hot-plug components and how to modify your server hardware (e.g. installing/removing hot-plug power supply units or hot-plug HDD modules) .

IUpgrades, updates and replacement of non-hot-pluggable components are described in the “Options Guide” or in the service supplement and may only be performed by authorized specialist personnel.

The hot-plug procedure increases the availability of system operation and guarantees a high degree of data integrity and failsafe performance.

VCAUTION!

Follow the safety instructions in the chapter “Important information” on page 21.

8.1Hot-plug power supply units

IA redundant power supply can be created by installing a second hot- pluggable power supply unit (optional). If one power supply unit fails, the other unit ensures operation can continue. The defective power supply unit can be replaced online.

RX330 S1

Operating manual

69

Image 69

Fujitsu RX330 manual Hot-plug components, Hot-plug power supply units

Contents

Primergy RX330 S1 Server Comments… Suggestions… Corrections… Copyright and TrademarksCertified documentation according to DIN EN ISO Contents Contents Abbreviations Literature Index Page Introduction Documentation overviewConcept and target groups for this manual Additional server documentation Documentation overview Introduction FeaturesFurther sources of information System board Accessible drives FeaturesPower supply USB port IRMC with integrated service LAN port Features Server management ServerStart Service and support RemoteView Notational conventions Notational conventions Technical data Electrical data hot-plug power supply unitCompliance with regulations and standards Weight Technical dataMechanical values Ventilation clearance Installation steps, overview Installation steps, overview Important information Safety Safety Installation and operationBefore starting up Important information Safety Working with CDs/DVDs and CD/DVD drives Laser informationNever remove parts of the CD/DVD drive casing Batteries ESD label Modules with Electrostatic-Sensitive Devices FCC Class a Compliance Statement CE conformityCE conformity Other important information Transporting the server Important information Environmentally-friendly product design and development Environmental protectionEnergy-saving information Packaging information Environmental protection Labels on plastic casing partsReturns, recycling and disposal Hardware installation Minimum acclimatization timeHours Unpacking the server Unpacking the server Rack requirements Installing/removing the server in/from the rack Installing/removing the server in/from the rack Primecenter RackDataCenter Rack Operating manual Mechanical requirements Fitting the support bracket Installation in PRIMECENTER/DataCenter Rack Remove the outer telescopic rail Operating manual Racks with installation depth of 735 mm Installation in 3rd party racks Preparing the server Inserting the server Inserting the server Hardware installation Connecting devices to the server Connecting the keyboard, mouse and monitor Connecting devices to the server Connecting the server to the mains Connecting the server to the mains Disconnecting cables Connecting cables Starting up and operation Controls and displaysFront of server Indicators on the control panel Controls and displaysControls Starting up and operation Indicators on the drives CD/DVD indicator LED Indicators on the HDD module Rear of server Global error indicator and ID indicator LAN indicators Indicators on the connection panel LAN indicators Status Meaning Hot-plug PSU indicators Switching the server on and off Switching the server on and offSwitching the server on System already installed Specified switch on time / switch off time Switching the server OFFRing indicator After power failure Configuring the server Configuring onboard SAS controllerConfiguring the server ServerStart advantages Configuration with ServerStart Configuration without ServerStart Cleaning the serverCleaning the server Configuring onboard SAS controller Preventing unauthorized Bios Setup calls Bios Setup security functionsPreventing unauthorized system access Property and data protection Protecting the server from being switched off by a program Protecting Bios from being overwritten Power-on indicator remains unlit Troubleshooting and tipsPower cable incorrectly connected Power supply overloaded Screen remains blank Server switches itself off Flickering stripes on monitor screen No screen display or display driftsNo mouse pointer displayed on screen Mouse controller disabled System will not bootSAS configuration incorrect Incorrect date and time Error message on screen Drives reported as dead when starting systemRAID controller configuration incorrect RAID controller is not configured for this drivePage Hot-plug components Hot-plug power supply units Remove the dummy module Hot-plug power supply units Hot-plug components Installing/removing the hot-plug power supply unit Replacing the hot-plug power supply unit Hot plug hard disk drives HDD module and dummy module Hot plug hard disk drives Handling hard disk drives and HDD modules Removing the dummy module Removing/Installing the dummy module Unlocking the HDD module Installing/removing the HDD module Installing the HDD module Installing the HDD module Removing the HDD module Vcaution Abbreviations Abbreviations IRMC LBA RAM SEL Literature Literature Primergy ServerView Suite ServerView S2 Primergy ServerView Suite ServerViewPrimergy ServerView Suite CD-RW DVD-RW Index DVD Index USB Dimensions Electrical data Index