Duplicating a video tape
If you connect the DVD/VCR to another VCR or Camcorder, you can duplicate a previously recorded tape. Make all connections before turning on the power.
Duplicating a video tape
DVD/VCR
INPUT SELECT
STOP
SP/SLP
DVD/VCR SELECT 
REC/OTR
Preparation:
¥Turn ON the TV and select the corresponding video input.
¥Press DVD/VCR to operate the DVD/VCR.
¥Press DVD/VCR SELECT to select the VCR mode. (The VCR indicator will light.)
¥Load a cassette tape with the erase prevention tab intact.
¥Load a previously recorded tape into the playback VCR or Camcorder.
Connection with second VCR
Playback VCR
To VIDEO OUT 
To AUDIO (R) OUT To AUDIO (L) OUT
1Press SP/SLP to select the desired tape speed SP or SLP.
It is recommended to set the tape
speed to the SP mode on the recording VCR for best results.
2Press INPUT SELECT once or twice to select AUDIO/VIDEO input position.
ÒL1Ó or ÒL2Ó will appear in the display.
L1: on the rear panel
L2: on the front panel
3Press PLAY on the playback VCR or Camcorder.
AUDIO/VIDEO cable (supplied)
Recording VCR
To VIDEO IN | To AUDIO (R) IN |
| To AUDIO (L) IN |
Connection with Camcorder
Playback Camcorder
To AV Jack
Other functions (VCR)
Recording VCR
4Press REC/OTR on the recording VCR. The duplicating process begins.
| To AUDIO (R) IN |
| To AUDIO (L) IN |
To VIDEO IN | AUDIO/VIDEO cable (not supplied) |
5 | Press STOP when you finish duplicating. | For duplicating a previously recorded tape from a |
| camcorder, follow the camcorder manufacturerÕs |
instructions. A typical camcorder dubbing hookup is shown above.
45
45 | 21/3/06, 9:44 AM |
