Toshiba SD-V594SC owner manual Connecting to an audio equipment

Connections

Connecting to an audio equipment

You can enjoy high quality dynamic sounds of DVD video discs or
audio CDs by connecting the DVD/VCR to optional audio	¥ This selection uses the following reference mark.
equipment.
		: Front speaker	: Center speaker
For connection to your TV, see ÒConnecting to a TVÓ
		: Rear speaker	: Signal flow
.
		: Sub woofer

Connecting to an amplifier equipped with a Dolby¨ Digital decoder

Dolby Digital		Manufactured under license from
Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is
		Dolby Laboratories. ÒDolbyÓ, ÒPro
now available to reproduce this realistic effect in the home. You can enjoy motion picture and live
		LogicÓ and the double-D symbol are
concert DVD video discs encoded via the Dolby Digital recording system with this dynamic realistic
		trademarks of Dolby Laboratories.
sound by connecting the DVD/VCR to a 6 channel amplifier equipped with a Dolby Digital decoder
or Dolby Digital processor. If you have a Dolby Pro Logic Surround decoder, you will obtain the full		¥	Use DVD video discs
benefit of Pro Logic from the same DVD movies that provide full 5.1-channel Dolby Digital soundtracks,
as well as from titles with the Dolby Surround mark.			encoded via the Dolby Digital
			recording system.
Amplifier equipped with a		¥	Make sure following setting.
Dolby Digital decoder		On-screen display		Select:	Page
To COAXIAL	To OPTICAL		ÒDigital OutÓ	ÒPCMÓ or	￿￿
				ÒBitstreamÓ
type digital	type digital
audio input	audio input
	Optical cable (not supplied)
	Connect either
	75 Ω coaxial cable (not supplied)

Connecting to an amplifier equipped with Dolby Surround Pro Logic

Dolby Surround Pro Logic

You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by connecting an amplifier and speaker system (right and left front speakers, a center speaker, and one or two rear speakers).

With an amplifier equipped with Dolby Digital	¥ Make sure following setting.
Connect the equipment the same way as described in ÒConnecting to an amplifier
equipped with a Dolby Digital decoder.Ó Refer to that amplifierÕs ownerÕs manual and set
		On-screen display	Select:	Page
the amplifier so that you can enjoy Dolby Surround Pro Logic sound.
With an amplifier not equipped with Dolby Digital		ÒDigital OutÓ	ÒPCMÓ or	￿￿
Connect the equipment as follows.
¥ This connection is only suitable for Video CDs and			ÒBitstreamÓ
Audio CDs.

*	Amplifier equipped with
	Dolby Surround Pro Logic

To audio input

*Connect one or two rear speakers. The output sound from the rear speakers will be monaural even if you connect two rear speakers.

	To ANALOG
Audio cable (not supplied)	AUDIO OUT

Connecting to an amplifier equipped with a DTS decoder

Digital Theater Systems (DTS)			ÒDTSÓ and ÒDTS Digital OutÓ are
DTS is a high quality surround technology used in theaters and now available for home use,
			trademarks of Digital Theater Systems,
on DVD video discs or audio CDs.
			Inc.
If you have a DTS decoder or processor, you can obtain the full
benefit of 5.1 channel DTS encoded sound tracks on DVD			¥	Use DVD video discs or
video discs or audio CDs.
				audio CDs encoded via the
Amplifier equipped with a
				DTS recording system.
DTS decoder			¥	Make sure following setting.
To COAXIAL	To OPTICAL		On-screen display		Select:	Page
type digital	type digital
audio input	audio input			ÒDigital OutÓ	ÒBitstreamÓ
	Optical cable (not supplied)					￿￿
		Connect either

75 Ω coaxial cable (not supplied)

24

2I40301A-En_p18-27 24 21/3/06, 9:42 AM