21/3/06, 9:44 AM
Notes:
¥ If the timer symbol ( ) blinks when the timer recording ended, the TV program has not been completely recorded because of an insufficient tape length. Press TIMER REC to cancel the timer program or press EJECT to remove the cassette tape.
¥ During timer recording standby mode, the VCR mode cannot be operated. To use the VCR, first press TIMER REC then press DVD/VCR SELECT to change to VCR mode. After VCR mode is selected, press TIMER REC again to put the VCR into timer recording standby mode.
¥ If you press TIMER REC during timer recording, the recording operation will be interrupted. If you press TIMER REC again within the programmed time, the recording operation will start again.
¥ After a power failure or disconnection of the power plug, all programmed recording settings and time display will be lost
upon resumption of power. In this case, reset the clock and reprogram any timer recording.
¥ If the cassette is ejected when TIMER REC is pressed, the erase prevention tab of the cassette may have been removed 34 .
¥ During Timer recording, the power cannot be turned off.
Notes:
¥ The timer recording will start at 5 seconds before the preset starting time.
¥ If the timer symbol ( ) does not appear on the display when TIMER REC is pressed, the cassette is not inserted
ENTER
CANCEL
VCR MENU
EJECT
DVD/VCR SELECT
TIMER REC
To enter other programs, repeat steps 2 through 4.
¥ To return to the normal screen,
press VCR MENUtwice.
〈〉
Press TIMER REC. The timer symbol ( ) will appear on the display and the VCR standbys for recording.
At the same time, VCR mode will
change to DVD mode automatically. You can use DVD even if the VCR is in the timer recording mode.
If you do not use the DVD, turn the power off.
DVD/VCR
SET +/Ð
Recording (VCR)
Timer recording
Timer recording can be programmed on-screen with the remote control. The built-in timer allows automatic unattended recording of up to 8 programs within 1 month.
Timer recording
Preparation: | | 5 |
¥ | Press DVD/VCR to operate the DVD/VCR. |
¥ | Press DVD/VCR SELECT to select the VCR mode. |
¥ | Load a cassette tape with the erase prevention tab | |
| intact. | | |
¥ | Check the time and date are correct | . | |
Example: Program a timer recording for the 26th day, channel 125 (Cable TV), 11:00 - 11:30 PM on timer
program number 1 (Tape speed: SLP). | | |
| Press VCR MENU. Select ÒTIMER REC SETÓ, | |
1 | then press ENTER. |
| | |
| 6 |
| |
| |
| | |
| | | | |
2Press SET + or Ð to select oneof the program line, then press ENTER.
| 〈〉 | 34 . |
Press SET + or Ð to select the date, then press | |
3 ENTER. | | |
〈〉
4Set the start time, end time, channel andtape
speed as in step 3.
〈〉
Notes:
¥Press CANCEL to move cursor backward for correction.
¥To record from external source set the channel to ÒL1Ó or ÒL2Ó.
42