Mounting instruction
Names of lead wires and destinations (refer to Page 68)
Caution
Never connect the power supply to the speaker leads, otherwise it cause damage to the main unit.
Note
To prevent unconnected leads from shorting out, insulate them by wrapping their tips with electrical tape. Similarly, insulate the ends of connected leads.
If an external amplifier is to be connected to the receiver, be sure to ground its outside housing to the vehicle body (a metal part).
No. | Name | Wire color | Destination |
|
|
|
|
1 | ACC | Red | Connect where the power comes on |
|
|
| when the ignition is in the ACC |
|
|
| position. |
|
|
|
|
2 | B+ | Yellow | Connect where the power is |
|
|
| constantly available, regardless of the |
|
|
| ignition switch's position. |
|
|
|
|
3 | Ground | Black | Connect where good body |
|
|
| grounding is available. |
|
|
| |
4 | Antenna power supply Blue | Connect to the | |
|
|
| control terminal of the vehicle. |
|
|
| |
5 | Illumination power supply Orange/White | Connect to where power comes on | |
|
|
| when the headlights are turned on. |
|
|
|
|
6 | Control power supply | Blue/White | Connect to the control terminal for |
|
|
| the external amplifier turn on. |
|
|
|
|
7 & 8 |
| Connect to the RCA input connectors | |
|
|
| of an external amplifier. |
|
|
|
|
9 | Speaker terminals |
| Connect them to their respective |
|
|
| speaker leads. |
|
|
|
|
10 | Cellular phone mute | Pink | Connect to the ground output |
|
|
| terminal on a mobile phone. |
|
|
|
|
66
