GETTING STARTED EN 15
Viewfinder Adjustment
1 Set the Power Switch to “A” or “M” while
Brightness Adjustment Of The Display
pressing down the Lock Button located on the switch.
2 Make sure the LCD monitor is closed and locked. Pull out the viewfinder fully and adjust it manually for best viewability.
3 Turn the Dioptre Adjustment Control until the indications in the viewfinder are clearly focused.
Example:
1 Set the Power Switch to “M” or “PLAY” while pressing down the Lock Button located on the switch.
2 Open the LCD monitor fully. ( pg. 18)
●To adjust the brightness of the viewfinder, pull out the viewfinder fully and set “PRIORITY” to “FINDER” ( pg. 22, 25).
3 Press MENU. The Menu Screen appears.
–
MENU
BRIGHT
+
GETTING STARTED
PAUSE
Dioptre Adjustment Control
CAUTION:
When retracting the viewfinder, take care not to pinch your fingers.
4 Press + or – to select “n”, and press MENU. The CAMERA DISPLAY Menu appears.
5 Press + or – to select “BRIGHT”, and press MENU. The Menu Screen closes and the brightness control indicator appears.
6 Press + or – until the appropriate brightness is reached.
7 Press MENU to clear the brightness control indicator from the display.
Tripod Mounting
To attach the camcorder to a tripod, align the direction stud and screw to the mounting socket and stud hole on the camcorder. Then tighten the screw clockwise.
