|
|
|
| MENUS FOR DETAILED ADJUSTMENT | EN 25 | ||
|
| SYSTEM |
|
|
| ||
|
|
|
|
| |||
|
|
| PRIORITY |
| |||
|
| ||||||
The “s SYSTEM” functions which are set when |
| [LCD]: The image is displayed on the LCD | |||||
the Power Switch is set to “M” are also applied |
| monitor when the viewfinder is pulled out while | |||||
when the Power Switch is set to “PLAY”. |
| the LCD monitor is opened. | |||||
[ ] = |
| FINDER: The image is displayed in the | |||||
|
|
|
|
| viewfinder when the viewfinder is pulled out | ||
BEEP |
|
| while the LCD monitor is opened. | ||||
OFF: Even though not heard while shooting, |
|
|
|
| |||
| CAM RESET |
|
| ||||
shutter sound is recorded on the tape. |
|
| |||||
| EXECUTE: Resets all settings to the factory- | ||||||
BEEP: The beep sounds when the power is |
| ||||||
turned on or off, and at the beginning and end of |
| preset. | |||||
recording. It also activates the shutter sound |
| [RETURN]: Does not reset all settings to the | |||||
effect. ( pg. 29) |
| ||||||
[MELODY]: Instead of a beep, a melody sounds |
|
|
|
| |||
when any operation is performed. It also |
|
|
|
| |||
activates the shutter sound effect. ( pg. 29) |
|
|
|
| |||
|
|
|
|
|
|
|
|
REMOTE |
|
|
|
|
| ||
|
|
|
|
|
|
|
|
OFF: Disables the remote control operations.
[ON]: Enables the remote control operations. It is recommended that this function be set to “OFF” to prevent improper operation.
DEMO MODE
OFF: Automatic demonstration will not take place.
[ON]: Demonstrates certain functions such as Program AE with special effects, etc., and can be used to confirm how these functions operate. Demonstration starts in the following cases:
●When the Menu Screen is closed after “DEMO MODE” is turned “ON”.
●With “DEMO MODE” set to “ON”, if there is no operation for about 3 minutes after the Power Switch is set to “A” or “M”.
●Performing any operation during the demonstration stops the demonstration temporarily. If no operation is performed for more than 3 minutes after that, the demonstration will resume.
ADVANCED FEATURES
NOTES:
●If a cassette is in the camcorder, the demonstration cannot be turned on.
●“DEMO MODE” remains “ON” even if the camcorder power is turned off.
●If “DEMO MODE” remains “ON”, some functions will not be available. After viewing demo, set to “OFF”.
