40 EN TROUBLESHOOTING
|
| Warning Indications |
Picture does not appear on the LCD |
| |
monitor. |
|
|
●The viewfinder is pulled out and “PRIORITY” is set to “FINDER”.
HPush the viewfinder back in or set “PRIORITY” to “LCD”. ( pg. 18, 22, 25)
●The LCD monitor’s brightness setting is too dark. HAdjust the brightness of the LCD monitor.
( pg. 15)
HIf the monitor is tilted upward 180 degrees, open the monitor fully. ( pg. 18)
An error indication (01 – 04 or 06) appears.
●A malfunction of some kind has occurred. In this case the camcorder’s functions become unusable.
H pg. 41.
Displays the battery remaining power.
Remaining power level
High | Exhausted |
As the battery power comes close to nil, the battery remaining power indicator blinks. When the battery power is exhausted, power turns off automatically.
Appears when no tape is loaded. ( pg. 16)
CHECK TAPE’S ERASE PROTECTION TAB
Appears when the erase protection tab is set to “SAVE” while the Power Switch is set to “A” or “M”. ( pg. 13)
USE CLEANING CASSETTE
Appears if dirt is detected on the heads during recording. Use an optional cleaning cassette. ( pg. 44)
CONDENSATION, OPERATION
PAUSED PLEASE WAIT
Appears if condensation occurs. When this indication is displayed, wait more than 1 hour until condensation disappears.
TAPE!
Appears if a tape is not loaded when the Recording Start/Stop Button or SNAPSHOT Button is pressed while the Power Switch is set to “A” or “M”.
TAPE END
Appears when the tape ends during recording or playback.
SET DATE/TIME!
●Appears when the date/time is not set. ( pg. 14)
●The
