Troubleshooting
Problem | Solution |
|
No video displayed on | • Press and hold the | button |
the monitor | ||
| to power on the monitor. | |
•Monitor is out of batteries. Plug in the monitor power adapter.
•Video Off or VOX mode is on. Press any button to turn the screen back on.
Monitor screen keeps | • VOX mode is on. See “Enabling |
turning off | VOX Mode (Voice Trigger)” |
| on page 14 for details on |
| disabling VOX mode. |
| • The monitor battery is low. Plug |
| in the monitor power adapter |
The camera is not | • Wrong channel selected. Press |
detected; “Out of Range” | repeatedly to select the |
is shown on the monitor | |
| channel. |
•Make sure the camera is powered on.
•Camera may be out of batteries. Replace the batteries.
•The camera and monitor may be out of range. Extend the antennas on the monitor and camera or move the monitor and camera closer together.
•You may need to pair the camera and the monitor again. See “Pairing Additional Cameras” on page 16 for details.
Feedback / squealing | • Your camera and monitor may | |
noise coming from the | be too close to each other. | |
monitor | Move them further apart. | |
| • Press | to lower the monitor |
| volume. |
|
|
| |
Feedback / squealing | • Your camera and monitor may | |
noise coming from the | be too close to each other. | |
monitor | Move them further apart. | |
| • For optimal performance, avoid | |
| placing the monitor and camera | |
| near televisions, computers, | |
| cordless/mobile phones, or | |
| other electrical equipment. | |
| • Lower the monitor volume. | |
ENGLISH
Need Help?
Product Support is available 24/7 including product information, user guides, quick start guides, and FAQ’s at www.lorexbaby.com/support
19
