Use of telnet
4.Type the commands, refer to below table, to control the projector and then press "Enter" key for termination. For example, type "C00" which is a command to turn on the projector, and press "Enter" key. Confirm the projector is turning on.
To disconnect the communication, press "Ctrl" key and "]" key at the same time.
The table below shows the typical command lists for controlling this projector and please consult your local dealer for further information of another commands.
Command list table
Command | Function |
| |
|
|
|
|
| C00 | Power on |
|
| C02 | Power off |
|
| C09 | Volume up |
|
| C0A | Volume down |
|
| C0B | Audio Mute on |
|
| C0C | Audio Mute off |
|
| C1C | Menu display on |
|
| C1D | menu display off |
|
|
|
|
|
*1 Further instructions about the telnet application, please see the
*2 The password is a Network PIN code decided item "Network PIN code setting" (☞p.30, 40). If the authentication of the entered password is failed 4 times continuously, the communication will be disconnected automatically. Please try again for the connection.
129
