Sanyo QXXAVC922---P System, Available selection at the RGBPC analog input, Controls, Item

Controls

System

This function is to select the system of signal input to the projector. The available system mode are listed on the pull-down menu button according to the input signal. Select a system and then click Set button.

Available selection at the RGB(PC analog) input

Item	Description
XGA1	It automatically switches to the proper computer
	system of the input signal.
	* The computer system modes (VGA, SVGA, XGA. SXGA,
	UXGA, WXGA...) which meet the input signal listed.

Available selection at the RGB(PC digital) input

Item	Description
D-XGA	It automatically switches to the proper computer
	system of the input signal.
	* The computer system modes (D-VGA, D-SVGA, D-XGA.
	D-SXGA1...) which meet the input signal listed.

Available selection at the Video/S-video/Scart input

Item	Description
AUTO	It automatically switches to the proper color system of
	the input signal.
	* The selectable color systems are PAL, SECAM, NTSC,
	NTSC4.43, PAL-M and PAL-N.
	* AUTO is fixed at the Scart input.

Available selection at the RGB(AV HDCP) input

Item	Description
AUTO	It automatically switches to the proper scanning system
	of the input signal.
	* The selectable scanning systems are D-480p, D-575p,
	D-720p, D-1035i and D-1080i.

Available selection at the Component input

Item	Description
AUTO	It automatically switches to the proper scanning system
	of the input signal.
	* The selectable scanning systems are 480i, 575i, 480p,
	575p, 720p, 1035i and 1080i.

✐ If the modes (Mode1 to Mode5) stored in the item "PC Adjustment" (☞ p.70) are available, they are also listed together with the above mode.

67