Sanyo SO-WIN-KF3AC, QXXAVC922---P owner manual Control by the projector, Network capture functions

Chapter 8 Network capture functions

[3] Control by the projector

* PC provides the Network Capture.

PC1 PC2

* Start capturing of t h e P C 1 f ro m t h e projector PJ2.

PJ1PJ2

Capture

PC3

PC4

Project a screen

PC6 image of PC1 with

PC5

PJ2.

Select "Network" as input mode previously.

1 Select "Network Capture" icon from "Network" menu. Press SELECT button on the projector twice to display the network capture setting pallet.

2 Select PC number to connect .

3 Select "Connect" and then press SELECT button to start capturing. The screen image of the selected computer will appear on the projected screen in real time.

4 To end capturing, select "Disconnect" and then press SELECT button.

Set "On" when using the wireless mouse function

✐ The IP address of the connecting PC should be registered previously (☞ p.89). ✐ If the error message appears, check item "Parameter set up" (+ p.88).

✐ The projector does not provide the function to register the IP address of the computer and to set the parameter of

92

the capturing. They should be registered by using the web browser previously (☞ p.89-90).